iniBuilds обновили до v1.1.2 Airbus A300-600R

LNAV

Major overall system rewrite to better handle turns into initial fix and SID/STARS and holds.

‍Systems

New improvements:

1 — bleed PSI should be +/- 30psi during start

2 — LO OIL PRESS should be on at fuel lever on and ECAM oil pressure should be red, until 70PSI (goes out and goes green at 72PSI)

3 — engine generators should come online at 52% N2, not 49%

4 — Overhauled PW start sequence following feedback from real A300 pilot

5 – Optimisations to increase performance

6 — ENG FADEC CHANNEL 1+2 FAULT – ECAM logic [Feedback from real A300 pilot]

7 — Significant improvements to stability with WASM crashes and CTD

Fixes:

Fixed — WASM Crash on SEC-FPLN Deletion/Activation

Fixed — WASM crash doing right turns

Fixed — WASM Crash on exiting Hold — EGSS ILS04 at ABBOT

Fixed – WASM crash related to terrain radar

Fixed — WASM crash when entering ZFW

Fixed — SD Wheel Page — Green/Orange overtemp Arc showing around wrong wheel

Fixed — Engine/APU Fire test logic corrected to match RW flow

Fixed — N1 Command/TLA Position Needle in wrong position during REV THRUST

Fixed — When on glide aircraft can’t be controlled

Fixed — IRS mode and source selectors missing interaction

Fixed — EFB remains off until Ext Power connected

Fixed — If ISOL valves off fuel line is drawn between ctr and outer tanks

Fixed — Showcase camera views

Fixed — Quick views R and L view corrected to 90*

Fixed — 3 max waypoints loading on AIRWAYS

Fixed — ECAM FUEL Page — Right Inner fuel feed line not drawn

Fixed — Throttle Calibration not working (Throttle input not detected)

Fixed — TCAS traffic INOP

Fixed — FCU Speed reverts to IAS when cruising in MACH mode once TOC is reached

Fixed — Flight perf feedback – refined overall flight performance

Fixed — Trim wheel missing integral lighting

Fixed — Shutdown Checklist

Fixed — FO Alt gauge OFF flag black pixels

Fixed — FUEL SD page and left ECAM MEMO page updating at different rates

Fixed — Fuel Pred — Pressing Fuel button in flight erases values

Fixed — IRS Alignment logic

Fixed — Direct to logic – Now allows for direct entry change

Fixed — VNAV Climb logic

Fixed — FMA/FMGS Logic

Fixed — MDCU Perf page logic

Fixed — MCDU F-PLN page — END OF F-PLN stuck on L2

Fixed — Trim wheel set to 1.0NU, but when adjusting with key controls it snaps to 0NU

Fixed — Speed targets in FMS don’t match what PROF commands

Fixed — TACT Mode logic

Fixed — PROG — FUEL PRED PAGE — Altn airport EFOB showing as «-N<-N»

Fixed – Holds adjusted to follow magnetic course

Fixed — ECAM — TO Mode

Fixed — STBY Horizon lost alignment after landing when the APU on

Fixed — Changing descent winds forecast does not affect T/D prediction | BTG

Fixed — Engine Start Sequence logic

Fixed — ND Config logic

Fixed — ND Display logic

Fixed — MDCU perf page logic

Fixed — FD1 annunciation disappears from PFD

Fixed — FMA modes logic corrected

Fixed — BRK TEMP HIGH ECAM message not clearing when Brake Fan selected

Fixed — MCDU flight plan display

Fixed — Assigning a button to control brakes causes conflicting command

Fixed — Secondary flight plan on the ND should be blue

Fixed — «500» Callout on Takeoff in pax variant

Fixed — Oil temp not rising fast enough

Fixed — FLT CTL page missing title

Fixed — FPLN Page — unable to input Lat/Lon as a fix

Fixed — Erroneous T/D

Fixed — Scrolling through F-Plan should be one wp per arrow press

Fixed — CTD When loading into plane (FLY NOW button)

Fixed — Rudder should still turn nosewheel by 6°

Fixed — MCDU F-PLN page additions and corrections

Fixed — ND Runway length filter for fields under 5000′ length (may sometimes return smaller fields based on sim logic)

Fixed — Plane stalls in VS mode when trying to hold a pitch below stall speed. Aircraft will now pitch down

Fixed — Airway L620 not returning fixes on FLT plan page

Fixed — T/O Perf calc page hPa/inHg tied to WEIGHT UNITS option in settings

Fixed — Weight & Fuel changing mid-flight, then FU bugged and SBY Horizon bugged

Fixed — Loss of systems after returning from pause

Fixed -Systems and display freezing — LSGG-LFSB with the LUMEL 8K arrival, ILS Z 15 approach.

Fixed — CTD — KLAX star ANJLL4 via DNERO transition, ILS 25L via CRCUS

Fixed -Speedbrakes show as deployed on ECAM on spawn in

Fixed — No Flex temp on TO calcs with PW

Fixed — BUS 1 should be connected to ESS BUS, GEN OVRD should have an arrow [Feedback from real A300 pilot]

Fixed — Landing distance calculator bug fixed

Fixed — Elapsed Timer does not show «1» in 10h02m ET

Fixed — Fix landing distance calculator (in current state, the METAR data does not sync)

Fixed — T/o Perf calculator does not mirror altimeter units from settings

Fixed — Eng Fire squib test still shows in Amber

Fixed — [EFB] MTOW discrepancy on TakeOff Perf Calculator

Added – You can now have a custom background on your EFB

Fixed — FMS: Distance to T/D should report actual distance and not distance between last w/p and T/D (distance between last and to should be actual distance, not segment distance between waypoints. [Feedback from real A300 pilot]

Improvement – Overhauled Packs off operations following feedback from real A300 pilot

Fixed — ILS freq selection: Only ILS freqs should be avail – uneven after “.” E.g.10/15/30/35…) .20/40/60 are not valid ILS freqs [Feedback from real A300 pilot]

Fixed — ECAM logic on start [Feedback from real A300 pilot]

Fixed — ECAM Brightness panel labels disappear when IDC Radios selected from EFB

Fixed — MODE CHG stuck on ND

Fixed — RMI Gauge VOR bearing/declination issue

Fixed — Eng N1 should show until +/- 1% on shutdown

Fixed — IMM EXIT prompt bug

Fixed — MCDU: PROG page — cannot return out of ENG OUT mode

Fixed — FCU lights disappearing in flight (daytime)

Fixed — Simbrief weights bugs

Fixed – TOD ETA incorrect

Fixed — Winds have no effect on INIT B or FUEL PRED page

Fixed — TRIP TIME and fuel burn predictions exaggerated

Fixed — FACT RWY19 TETAN 1A SID

Fixed — FMS: OPT and MAX FL’s are in steps of FL005 [Feedback from real A300 pilot]

‍Art

Fixed — All outside animations and cockpit yoke tiller animations running at 5/10 fps

Fixed — Stairs don’t spawn on freighter

Fixed — Backpanel APU EGT, N1 and OIL gauge needles not lit at night

Fixed — EGT warning light on GE engine config lighting up at PW limits

Fixed — Oil QTY bugs animation no longer as smooth as before

Fixed — Hole in rear of GE model (Checked all liveries)

Fixed — FO TERR MODE GPWS decals missing

Fixed — Floating fan blade numbers PW DHL (D-AEAF)

Fixed — D-AEAF red texture line floating when bulk door opened

Fixed — Reversed text on tyres when worn

Fixed — Fuel Pressure Indicator Window missing on liveries

Fixed — [XBOX][ART] Double edge around windows (and no textures)

Fixed — L/R Stairs not showing when selected from EFB

‍Sounds

Fixed — External airport ambience sound adjustment

Fixed – Various overhauls and minor tweaks

Fixed — Allow warnings/callouts/alerts volume to be controlled separately

Fixed — Trim “Whooler” sound missing

Fixed — APU external sounds

‍EFB

Added can now create a custom background.